37. Piping or Equipment Installation Please refer to the 36. Piping Installation in JSA (위험성평가). ∴ ∴ Hazard Category Hazards Controls Injury to personnel or property damage 1. Can occur that do not comply with PTW or procedures 1. Obtain correct permit to work, task supercisor to conduct TBM on daily basis and discuss all […]
37. Piping or Equipment Installation 더 읽기"
36. Piping Installation What safety precautions must be taken during the installation of pipe? 8 Critical Pipeline Safety Precautions to Consider Carry Out Frequent Safety Training. … Foster a Corporate Safety Culture. … Ensure Proper Pipeline Excavation Procedures. … Use Appropriate and Adequate PPE While Working Onsite. … Ensure Adequate Training for Operators of Heavy-Duty
35. Operating Tube Profiling Machine The tube profiling machines is extremely important that everyone remembers the proper safety rules while operating the machines. This will be a rundown of the basic safety rules that should be followed while working with or around a tube profiling machine. The first general rules for tube profiling machine operation are You should never work with a tube profiling machine
35. Operating Tube Profiling Machine 더 읽기"
34. Operating Pneumatic Hand Tools Pneumatic tools are powered by compressed air. Common types of these air-powered hand tools that are used in industry include buffers, nailing and stapling guns, grinders, drills, jack hammers, chipping hammers, riveting guns, sanders and wrenches. Using safe pneumatic hand tools Review the manufacturer’s instruction before using a tool. Wear safety
34. Operating Pneumatic Hand Tools 더 읽기"
33. Operating Pipe Cutting Regarding cutting pipes, any piece of cutting equipment can be dangerous if not operated properly. Operators are responsible for the safe operation of this equipment. The operator must carefully read and follow any warnings, safety signs and instructions provided with or located on the equipment. Do not remove, defeat, deface or render inoperable any of the safety devices or warnings on this equipment. IF any safety devices or warnings have been removed, defeated, defaced or rendered inoperable, DO NOT USE THIS EQUIPMENT!!! ∴ ∴ Hazard Category Hazards Controls
33. Operating Pipe Cutting 더 읽기"
32. Operating Over Head Cranes An overhead crane is a piece of gear, that permits you to lift and move weighty materials starting with one area then onto the next in an exact way. Overhead cranes are a fast way to move and transport different loads in many industries. It consists in parallel runways with a travelling bridge. The
32. Operating Over Head Cranes 더 읽기"
31. Operating Mobile Plant & Machinery The operation of powered mobile plant at construction workplaces exposes workers to a range of risks to health and safety. These risks include: the plant overturning things falling on the operator of the plant the operator being ejected from the plant the plant colliding or coming into contact with
31. Operating Mobile Plant & Machinery 더 읽기"
30. Operating Mobile Cranes A crane is an item of plant intended for raising or lowering a load and moving it horizontally including the supporting struture of the crane and its foundations. There are a range of ‘fixed’ (tower, bridge, gantry, portal boom, vessel-mounted) and ‘mobile’ (slewing, non-slewing, vehile loading) cranes. ∴ ∴ Hazard Category
30. Operating Mobile Cranes 더 읽기"
29. Operating Forklift Trucks Lift trucks can be dangerous machines. If you don’t use them properly, they can kill and injure people. Follow this advice to help you and those you work with stay safe. Operating ■ carry out a pre-shift check of the lift truck; ■ wear operator restraints, where fitted; ■ look all
29. Operating Forklift Trucks 더 읽기"
28. Operating Cranes (Pedestal or Tower) A crane is an item of plant intended for raising or lowering a load and moving it horizontally including the supporting struture of the crane and its foundations. There are a range of ‘fixed’ (tower, bridge, gantry, portal boom, vessel-mounted) and ‘mobile’ (slewing, non-slewing, vehile loading) cranes. ∴ ∴
28. Operating Cranes (Pedestal or Tower) 더 읽기"
27. Operating Bench Type Profile Cutters Ensure bench type profile cutters are securely fastened to a bench or purpose-designed stand. Ensure shearing edges are in good condition, distortion free and correctly adjusted. Ensure working parts are well lubricated and the blades free of rust and dirt. Check workspaces and walkways to ensure no slip/trip hazards are
27. Operating Bench Type Profile Cutters 더 읽기"
26. Nitrogen Testing Nitrogen (pressure) testing involves applying stored energy to an assembly of parts, in order to verify its strength, its integrity and/or its functionality. The action you need to take to comply with these regulations will depend primarily on; – the size of assembly under test – its test pressure – the test
25. Moving Around Platform 고소작업대, 컨베이어, 자동화창고 등의 AGV (Automated Guided Vehicles) 등등 주변에 움직이는 기기 또는 장치가 있는 환경에서 작업이 이뤄지는 상황을 전제로 위험요인을 파악하고 있습니다. 입동이 지나고 2021년 첫 겨울비가 내리는 날이네요. 몸은 춥겠지만, 마음은 따뜻한 겨울이 되었으면 좋겠네요. ∴ ∴ Hazard Category Hazards Controls Hearing Damage 1. During maintenance works, etc. There
25. Moving Around Platform 더 읽기"
24. Masonry and Plastering Work Description – Plaster is a thin layer of mortar applied over the masonry surface and it acts as a damp-proof coat over the brick masonry work. Plastering also provides a finished surface over the masonry that is firm and smooth hence it enhances the appearance of the building. ∴ ∴ Hazard Category
24. Masonry and Plastering Work 더 읽기"
23. Manual Handling Manual Handing – means any activity requiring the use of force exerted by a person to lift, lower, push, pull, carry or otherwise move, hold or restrain some things . It also includes any activity involving repetitive and/or movements. Manual handling causes over a third of all workplace injuries. These include work-related musculoskeletal disorders
22. Maintenance Work on Plant plant maintenance is the application of best practices to increase equipment up time in manufacturing facilities. This helps plants avoid unplanned downtime and ensures production stays on schedule. ∴ Why is maintenance of plant and equipment important? An effective maintenance programme will make plant and equipment more reliable. Fewer breakdowns will
22. Maintenance Work on Plant 더 읽기"
21. Leak test of Pipes The leak test involves filling the pipe system with a liquid, usually water, which may be dyed to aid in visual leak detection, and pressurization of the pipe to the specified test pressure. Pressure tightness can be tested by shutting off the supply valve and observing whether there is a
20. Insulation for piping and equipment Piping and equipment should be insluated according to the insulation class, operating temperature and insulation thickness stated in the P&ID and Data sheets. All insulation shall be covered with weather protection designed and installed to prevent ingress of water during normal operation. Types of Insulation 1) Hot Insulation –
20. Insulation for piping and equipment 더 읽기"
19. Instrument Installation The instrument installation is in designing, specifying, procuring, calibrating, installing, piping, loop checking, commissioning and maintaining instrumentation and control systems for a wide range of industrial and commercial process controls, ensuring that the plant operates safely. ∴ ∴ Hazard Category Hazards Controls Defective Equipment 1. Accidents can occur through the use of faulty
19. Instrument Installation 더 읽기"
♦ 불갑산 佛甲山, 전남 영광군 불갑면 모악리와 함평군 해보면에 있는 산. 높이는 516m이고, 주봉은 연실봉이다. 원래는 아늑한 산의 형상이 어머니와 같아서 ‘산들의 어머니’라는 뜻으로 모악산이라고 불렸는데, 백제시대에 불교의 ‘불(佛)’자와 육십갑자의 으뜸인 ‘갑(甲)’자를 딴 불갑사가 지어지면서 산이름도 불갑산으로 바뀌었다고 한다. 숲이 울창하고 산세가 아늑하며, 참식나무와 상사초 같은 희귀식물들이 자생군락을 이루고 있다. 많은 인파가 북적이지 않아서 조용한 산행을
