LPG Gas Safety Tips

With the increasing use of gas in households and the rising frequency of gas-related accidents, the potential dangers continue to grow. To prevent such incidents, it is essential to know how to use gas safely and apply these habits in daily life.

 . 

 . 

▣ Precautions Before Use

 . 

1) Ventilation
Before using gas, always check for any gas smell around the stove or indoors, and ventilate the room by opening windows.

• Do not keep flammable items near the gas burner.

• Gas often leaks from connections such as cocks or hoses. Always secure hoses with clamps, and replace them immediately if they are worn or damaged.

• Clean the stove regularly to prevent food debris from clogging the burner holes.

 . 

 . 

 

2) Check the Flame

• If the flame is yellow or red instead of blue, it indicates incomplete combustion. This not only wastes fuel but also produces carbon monoxide. Adjust the air control until the flame burns blue.

• If wind or spilled food extinguishes the flame, gas may continue to leak. Frequently check that the flame is still burning during use.

• If your burner has no automatic safety shut-off, gas will keep leaking when the flame goes out. Always turn off the valve, ventilate thoroughly, and only relight once the leaked gas has completely dissipated.
  ⚠️ Never use electrical appliances such as fans or ventilators to remove leaked gas, as sparks can trigger explosions. Instead, use non-electric tools like cushions or brooms to fan the air.

• If the gas runs out and the flame goes out, always close both the burner valve and the intermediate valve.

 . 

 

3) Close the Valves

• After using gas, close not only the burner valve but also the intermediate valve.

• If leaving home for an extended period, close the intermediate valve and the LPG cylinder valve. For city gas, also close the main valve located near the gas meter. This prevents accidents such as gas leaks igniting from the small sparks of a refrigerator.

• Even empty gas cylinders often contain residual gas. Never leave the cylinder valve open, as leftover gas may leak. Always close it tightly and store the cylinder in a safe, flame-free area.

 . 

 . 

▣ Routine Leak Checks

Gas is odorized so that leaks are easy to detect by smell. However, if only a small amount leaks—or if someone’s sense of smell is impaired—it may go unnoticed. The best prevention is to regularly check for leaks yourself.

 . 

1) Simple Leak Test Method

• Apply soapy water or a leak-detection solution to areas where leaks are likely, such as hose connections. If bubbles form, gas is leaking.

• In most households, connections between hoses and pipes are the main areas to check unless the hose is extremely old or the burner is broken.

• Mix kitchen dish soap with water in a 1:1 ratio to create foamy bubbles. Apply it with a brush or sponge to hose joints and connections.

• If no bubbles appear, there is no leak. Even small leaks can be easily identified by bubble formation.

 . 

 . 

⚠️ If you detect a leak, immediately close the cylinder or main valve and contact your supplier for repairs before using gas again.

💡 Tip: Choose a regular day of the week to perform this soapy water test as part of your household safety routine.

 . 

 .