Safety Issue

Dangerous broken fluorescent lamp

▣ Types of Lights We Use

Fluorescent lamps are light bulbs that contain mercury sealed in a vacuum glass tube, with the inner walls coated with phosphorescent material. They emit bright white light by producing ultraviolet rays from mercury discharge, which then react with the phosphorescent material to produce visible light. Recently, in addition to white light, there are fluorescent lamps that emit daylight colors and warm colors, and there are also compact fluorescent bulbs that are not tube-shaped.

Ten years ago, fluorescent lamps were the most widely used lighting, but recently LED lighting has become predominant. LEDs come in various shapes and colors, have a long lifespan, and quickly replace incandescent and fluorescent lamps. They emit very bright and clear light, and if the light turns on as quickly as an incandescent bulb, it is likely an LED. Recently, LED lights that mimic the filament of incandescent bulbs for interior design purposes have also been produced.

▣ The Danger of Mercury in Fluorescent Lamps

The essential material in fluorescent lamps is mercury (Hg), which is classified as a Group 1 carcinogen. The average mercury content in one fluorescent lamp is 25mg. If a fluorescent lamp breaks, the mercury inside can disperse into the air and cause problems. If it breaks in an open space and the gaseous mercury disperses into the atmosphere, it’s not as problematic. However, in enclosed spaces like homes or offices, inhaling mercury can be dangerous. Even small amounts of mercury can have severe effects on the brain and kidneys, so caution is required to avoid inhalation.

Mercury vapor can cause severe damage to the brain, and consuming food or water contaminated with mercury can adversely affect the kidneys. Diseases caused by mercury, such as Minamata disease, are well-documented. In the fishing village of Minamata in Japan, a nearby steel factory released mercury-containing wastewater into the ocean. This contaminated the seafood, leading to mercury poisoning in 111 residents, 47 of whom died from respiratory paralysis. By 1965, about 6,000 people experienced partial poisoning symptoms, including nerve damage in the hands and feet, sensory impairments, and walking disabilities.

About 140 million fluorescent lamps are discarded annually, releasing 3.3 tons of mercury each year. If not separated and recycled, but instead incinerated or landfilled, they can cause heavy metal pollution through leachate or exhaust gases. A study by the Gyeonggi Development Research Institute found that South Korean incinerators emit 1.5 times more mercury than those in advanced countries.

According to a 2015 study by Kyung Hee University on the efficient management of mercury-containing waste from fluorescent lamps, landfilling fluorescent lamps can lead to soil and groundwater contamination and pose a threat to human health through bioaccumulation in plants and animals.

Additionally, LED lights contain valuable metals such as gold (Au), silver (Ag), copper (Cu), gallium (Ga), and indium (In). Some LEDs also contain arsenic (As), a Group 1 carcinogen, which can cause soil pollution if simply landfilled. This necessitates special treatment for LED light waste as well.

▣ Collection Methods for Used Fluorescent Lamps in Advanced Countries

United States

Since 1989, the U.S. has developed technology to safely recover and recycle mercury from used fluorescent lamps. With strengthened regulations at the state level, the number of recycling companies has increased, and by the end of 2000, fluorescent lamp recycling had increased by 20%.

Austria

Austria applies a consumer deposit system to used fluorescent lamps. The sale price includes a deposit and disposal fee, which is refunded when the used lamp is returned to the retailer. For large users purchasing over 50 lamps a month, personal information and purchase details must be recorded, allowing them to buy lamps at a price excluding the deposit. The records are sent to waste management agencies for tracking.

Sweden

Since July 2001, Sweden has enforced an Extended Producer Responsibility (EPR) system for electrical and electronic products, requiring consumers to return an equal number of old products when purchasing new ones. Producers must collect and process these products for free and provide necessary information to the Ministry of the Environment. Failure to meet standards or comply with obligations results in fines.

Taiwan

The Taiwanese Environmental Protection Administration designated used fluorescent lamps as recyclable waste in 2002 and began recycling in 2003. Most retailers and large wholesalers collect used lamps, and local governments follow guidelines to separate recyclables and send them to recycling facilities.

South Korea

In November 2000, the Ministry of Environment and the Korea Lighting Recycling Association signed a voluntary agreement with producers to implement the EPR system. This system mandates producers, importers, and retailers to recycle products like fluorescent lamps and batteries from the point of disposal.

▣ Proper Disposal of Used Fluorescent Lamps

Used fluorescent lamps, including straight (FL), circular (FCL), CFL, compact (FPL), and other mercury-containing lighting products, must be disposed of in designated fluorescent lamp collection bins located in apartment complexes or nearby community centers. If a lamp breaks, it should be placed in a non-combustible trash bag for disposal.

Because used fluorescent lamps contain hazardous mercury, unauthorized breaking can cause severe environmental pollution, making it legally mandatory to recycle them. Violations can result in fines according to local government regulations. Businesses subject to the Waste Management Act must properly recycle used fluorescent lamps by consigning them to the Korea Lighting Recycling Association.

In contrast, LED lights were typically discarded as general waste in volume-based trash bags. Despite containing valuable recyclable metals like aluminum, copper, and silver, they were not recycled due to a lack of collection methods. Starting in 2023, the EPR system also includes LED lighting, beginning with bulb-type and straight-type LEDs, which will be collected separately for recycling.

kassy

Recent Posts

Positive Displacement Pump의 분류 및 특성

▣ Positive Displacement Pump(용적식 펌프) 일정 공간에 갇혀있는 액체를 왕복 또는 회전운동으로 압축하여 압력을 높임으로서…

5일 ago

Centrifugal Pump의 분류 및 특성

▣  Centrifugal Pump의 분류(API Standard 610) . . ▣  OH1 Type . . ▣  OH2 Type . .…

6일 ago

Centrifugal Pump의 원리와 용어

▣ Centrifugal Pump의 원리 Centrifugal Pump Impeller를 Casing 내에 회전시켜 액체에 에너지를 주는 기계 Pump 내에 물을 가득 채우고 Impeller를…

1주 ago

Pump의 정의 및 분류

▣ Pump란? Driver(구동기)를 사용하여 Impeller(회전차)의 회전 또는 Piston이나 Plunger의 왕복운동을 통해 비압축성 유체인 액체를 낮은 곳(압력이 낮은 곳)에서…

4주 ago

기술평가와 Vendor Print

▣  기술평가 1. 기술 평가 (Technical Bid Evaluation: TBE) 기기 공급자(Vendor)가 제시한 기술 견적서 내용이…

1개월 ago

기계장치 구매사양서

▣ 구매관리 기계장치 구매사양서 1) 기계장치의 재질, 특성 및 난이도, 적용 Code and Standard, Vendor Capacity 등을 고려 2) 서로 유사한 Item끼리 Grouping 함…

1개월 ago